| |
|
 Pre-Printed Header Labels (B-595)
Enables you to produce full colour labels with a single
colour printer.
Designed in accordance with Australian Standard® AS1319, the Pre-Printed label range is exclusive to Brady. Smaller
quantities per roll are available for small and medium
sized sites.
|
 Pre-Cut Tags (B-551)
Overprint with your custom text. Ideal for Lockout or
maintenance tags. Available blank or with a pre-printed
Danger header. The pre-printed Danger header tag enables
you to produce full colour tags with a single colour printer.
Plastic grommets available to strengthen mounting hole.
Designed in accordance with Australian Standard® AS1319.
|
 Pre-Cut Blank Labels (B-595)
For general purpose, peel-off-and-apply identification.
-Ideal for a wide range of labelling applications
-Includes 2, pre-cut and pre-sized to fit heavy-duty rigid tags
-Indoor/outdoor grade material
-Conforms well to rough, irregular & "difficult to adhere to" surfaces
|
 Indoor/Outdoor Vinyl (B-595)
For general facility and safety identification: Our best
industrial vinyl yet.
Service temp: -40ºC to 82ºC
Application temp: -18ºC to 82ºC
Average Outdoor Durability: 8 to 10 years
|
 Low-Halide Polyester (B-569)
For labelling stainless steel and smooth surfaces.
Service temp: -40ºC to 100ºC
Application temp: -18ºC to 100ºC
Average Outdoor Durability: 3 to 5 years
|
 Retro Reflective Tape (B-584)
For highly reflective identification that shines back
brightly when struck by light.
-Ideal for labelling outdoor utility poles and pedestals,
jobsite equipment and roof-top equipment
-Recommended for low light or inclement weather
conditions
|
 High-Intensity Photoluminescent Tape (B-526)
For glow-in-the-dark identification up to 10 hours!
-Designed for directional and evacuation marking
-Ideal for marking emergency utility shut-offs, fire
extinguishers, alarm pulls, and vital equipment controls
|
 Repositionable Vinyl (B-581)
For 5S and lean applications.
-Aggressive adhesive stays in place but removes cleanly
without leaving adhesive residue
-Ideal for temporary, removable, and repositionable labels,
like 5S and lean inventory labels
|
 Printable Magnetic Supply (B-509)
Easiest and quickest material for removing and
repositioning.
- Non-adhesive magnetic material that can be printed on
directly
-Ideal for reusable and repositionable identification
applications
|
 Tamper Evident Metallised Polyester
Tape (B-438) & High Temp Metallised
Polyester Tape (B-565)
For secure identification that indicates if it has been
tampered with.
-B-438 tape leaves a "checkerboard" footprint if removed
and a checkerboard also appears on top surface of label
to prevent label re-use
-B-565 material has a high upper temperature rating and
is not tamper evident
-Ideal for product rating plates, product warranty labels
and asset identification labels
|
 Cold Temperature Application Material (B-549)
For identification in temperatures as cold as -40ºC.
-Special adhesive permanently adheres to extremely cold
surfaces
-Can be applied in -23ºC and lasts in -40ºC
-Ideal for cold storage warehouses, coolers, freezers, and
short-term winter outdoor use
|
 Make Your Own Valve Tags
Heavy-duty valve tags and industrial tags.
-Use with Pre-Cut Blank Labels (B-595) from above
(pre-cut to fit tags)
-Tags have centre hole for hanging; corner holes accept
round wire or flat fastening straps
-Tag is non-conductive, non-corrosive; resistant to
hightempratures & impact
|
 Non-Adhesive Tag Stock (B-551)
For safety, lockout and general purpose hang-tagging.
-Non-adhesive, semi rigid card stock
-Easy to hole-punch; optional snap-in grommets available
Service temp: -40ºC to 89ºC
Average Outdoor Durability: up to 2 years
Thickness: 0.35mm
|
 Raised Profile Labels - Engraved Plate
Substitutes (B-593)
Costs up to 80% less than engraved legend plates.
-High gloss, polyester label with thick 0.70mm raised
profile and ultra-aggressive adhesive
-High performance, low cost substitute to engraved plates
-10-year outdoor durability rating
-On-demand labelling: labels print out in less than 4
seconds
- Flexible labelling options: 6 colours, 7 rectangular sizes,
5 pushbutton sizes (including keyed and non-keyed
22.5mm and 30.5mm hole dia keyed)
|
 Self-Laminating Cable & Wire Labels (B-427)
For wire and cable identification: Our most popular
wire & cable labels.
-Conformable material designed to adhere to highly
curved surfaces, wires and cables
-Features a white printable area with clear "tail" that wraps
around marker
-Clear tail serves as over-laminate to protect the text,
providing superior resistance to abrasion, dirt, oils,
solvents, water and excessive handling
|
| |
Fri, May 18